FLK-FL053S Double-crank lifting nursing bed

1. The bed body is welded with thickened steel pipes, with reasonable structure, strong and durable, and the surface is treated with electrostatic spraying. The shape of the bed should be neat, without sharp edges on the surface, the welding should be firm, the weld should be smooth and uniform; the spraying layer should be smooth and flat, with uniform color; the bed body and bed frame should be firmly fixed after assembly and should not be loose.

2. Configuration technical parameter requirements: Bed specifications 2000mm*900mm*480mm. Net weight: 53KG. The minimum wall thickness of the bed side pipes on both sides of the bed shall not be less than 1.8MM, and the bed side shall use 40mm*80mm square pipes.

3. Equipped with ABS hanging headboard;

4. Cushion: 400MM brown mat;

5. Aluminum alloy guardrail;

6. Equipped with emergency call alarm function, the alarm host voltage adaptive range is 85v-265v, the wireless transmission distance shall not be less than 100 meters, the host has voice broadcast, flash prompt, emergency call, bed fall alarm, urine wetness prompt, remote alarm function.

7. Equipped with dining table.

The two sides of the bed must be welded to completely seal the opening